Changing The Image Display Time - Canon Powershot SD970 IS Digital Elph User Manual

Turning off the AF Assist Beam
The lamp will automatically light to assist focusing in low light conditions
when you press the shutter button halfway. You can turn off the lamp.

Changing the Image Display Time

You can change the length of time the images display directly after shooting.
Changing the Image Display Right After Shooting
You can change the image display that appears after shooting.
Changing Shooting Functions
●
Select [AF-assist Beam], then press the
qr buttons to select [Off].
Select [Review], then press the qr
●
buttons to select an option.
●
If you select [Off], the image will not
display.
●
If you select [Hold], the image displays
until you press the shutter button halfway.
Select [Review Info], then press the qr
●
buttons to select an option.
Detailed Displays detailed information (p. 45).
The area inside the AF frame is
Focus magnified, allowing you to check the
Check focus. The procedure is the same as
in "Checking the Focus" (p. 109).
137