Changing Shooting Functions - Canon Powershot SD970 IS Digital Elph User Manual

Changing Shooting Functions

Changing the Lens Retract Time
For safety reasons, the lens retracts about 1 minute after pressing the 1
button when in a shooting mode (p. 27). You can set the retraction time to
[0 sec.].
Changing Shooting Functions
If you set the mode switch to 4, and the mode to G, you can change the
settings in the 4 tab (p. 48).
Before attempting to shoot using a function explained in this chapter in
modes other than G mode, check if the function is available in those
modes (pp. 150 – 153).
Turning off the Red-Eye Reduction Function
The red-eye reduction lamp lights in order to reduce the red-eye effect that
occurs when shooting in dark conditions with the flash. You can turn off this
function.
136
Select [Lens Retract], then press the qr
●
buttons to select [0 sec.].
Select [Flash Settings], then press the m
●
button.
Press the op buttons or turn the  dial
●
to select [Red-Eye Lamp], then press the
qr buttons to select [Off].