Maintenance Administration Terminal (Mat); Customer Administration Terminal (Cat); Registers - NEC NEAX 2000 IVS2 Retrofit Manual

Maintenance Administration Terminal (MAT)

• MATWorX Studio for the NEAX2000 IVS
Retrofit system. MATWorX 32 for the former system cannot be used for the Retrofit system.
• Existing system data for the former system cannot be reloaded for the Retrofit system. New
data entry is required when the system is upgraded.
• Graphical Configuration Report, a MATWorX Add-In tool, is not available for the Retrofit
system.
• Quick Install Program for the NEAX2000 IVS
the Retrofit system.

Customer Administration Terminal (CAT)

• The Retrofit system can be programmed from the selected desktop D
as the former system.

Registers

• When CP16 is "C" loaded, the register E200 is now in system memory (not on a physical
LEN).
NEAX2000 IVS Retrofit System Guide
ND-71075 (E), Issue 1.0
CHAPTER 1 GENERAL INFORMATION
2
/NEAX7400 ICS M100MX is required for the
2
/NEAX7400 ICS M100MX is not available for
System Conditions
term
stations as well
Page 9