Manually Adjusting The Focus And Changing The Focusing Mode - Canon DC10 Instruction Manual

Manually Adjusting the Focus and
Changing the Focusing Mode
Autofocus may not work well on the following subjects. In such case, focus manually.
Reflective
surfaces
1. Set the camcorder to a recording mode (
and move the mode switch to a position other than
2. Adjust the zoom.
3. Push the omni selector (
"MF" appears.
4. Adjust (
Pushing the omni selector (
The camcorder will automatically return to autofocus when you move the mode
switch to
Readjust the focus when you have turned off the camcorder.
Infinity Focus
Use this function when you wish to focus on faraway subjects such as mountains or
fireworks.
After step 2 above, hold the omni selector pushed (
for more than 2 seconds.
" " appears.
If you operate the zoom or the omni selector (
changes to "MF" and the camcorder returns to manual focusing mode.
52
Subjects with low
contrast or without
vertical lines
) towards FOCUS.
) the focus as required until the image appears focused.
) again will return to autofocus.
.
Through
Fast Moving
dirty or wet
Subjects
windows
Mode switch
Zoom lever
Omni Selector/FOCUS button
) during infinity focus, "
Night Scenes
or
.
) towards FOCUS
"
)