3_D74PAL_E(42-86)
Adjusting the Focus Manually
Autofocus may not work well on the following subjects:
Reflective surfaces
Through dirty or
wet windows
CAMERA
1. Set the program selector to
2. Adjust the zoom.
When you operate the zoom after adjusting the focus, the
subject may not stay in focus. Adjust the zoom before the focus.
3. Press the FOCUS button.
"MF" appears.
4. Turn the focus ring to adjust the focus.
• Turn the focus ring up or down until the image appears
focused.
5. Press the FOCUS button to return to autofocus.
The setting resets to autofocus when you switch the program selector to [.
Downloaded From CamcorderManual.com Canon Manuals
03.2.5 4:08 PM
Page 75
Subjects with
low contrast
(e.g. White Wall)
Different Distances
PLAY (VCR)
Q
.
Fast Moving Subjects
Horizontal Stripes
Dark Subjects
CARD CAMERA
E
Night Scenes
CARD PLAY (VCR)
75