Canon DC10 Instruction Manual page 75

( 59)
1. Set the camcorder to record movies (
2. Upload a sample image from the supplied disc to the memory card.
Refer to Adding Still Images from Your Computer to the Memory Card in the Digital
Video Software instruction manual.
3. Move the mode switch to a position other than
4. Press the FUNC. button.
5. First, select (
column and then select (
bottom bar and press (
6. Select ( ) the [IMAGE SELECT] option, and then select (
still image you want to combine.
• The still image will be displayed briefly.
• Only still images recorded on the memory card can be selected for the Card Mix
function, regardless of the current media selection for still images.
7. Select ( ) the [MIX TYPE] option, and set (
appropriate for the image you selected.
If you selected [C.ANIMATION], select (
animation type preferred.
8. If you want to adjust the mix level, select (
( ) the level preferred.
9. Press ( ) to save the settings and press the FUNC. button to close
the menu.
" " appears.
10.Press the D.EFFECTS button.
" " turns green and the combined image appears.
Turn off the digital effects [D.EFFECT OFF] when you are not using them.
The camcorder retains the setting last used even if you turn off the digital effects
or change the recording program.
The image quality may be slightly lower with digital effects.
D.EFFECT OFF
) the current digital effects symbol from the left side
) the [
).
Mode switch
FUNC. button
Omni Selector
).
.
CARD MIX] option from the
) a mix type
) [ANIMAT.TYPE] and set (
) [MIX LEVEL] and set
E
) the
) the
75