Honeywell NEXH Series Installation&Operation Manual Book page 11

Simple Function Control Guide
* This function is specialized to HTX-5000 keyboard.
Function
① Twist Joystick to the right.
ZOOM
/FOCUS/
② Twist Joystick to the left.
Iris
③ Press
④ Press
Wiper ① Press
Control
Press
in sequence.
(85+ Preset) at Pelco-D Protocol
② Press
Press
in sequence.
(69+
① Press
(Press 95+
Pelco protocol)
Camera
② Move Joystick to the
Menu
right/left/Up/Down.
③ Press
button.
(Press 95or96+
Pelco Protocol)
Washer ① Pull Joystick to down for switch
Pump On and release for switch Off.
Process
button.
button.
(On) button or
and (On) button
1
(Off) button or
and (Off) button
1
Preset) at Pelco-D Protocol
(Menu) button. .
(preset) button at
(Menu) or (Enter)
(preset)button at
Results
-ZOOM IN
-ZOOM OUT
-Focus is changed to Near or Far
Return to Auto Focus mode by
moving the joystick.
-Iris is opened or closed
Moving the joystick reactivates Auto
Iris mode
-Wiper moves as keeping a steady
angle.
-Wiper stops.
-Enter the Camera Menu
-Cursor moves right/left/Up/Down
-Save or Change a value/data
-Water will be come out from the
nozzle until Joystick back or released.
- 11 -
Remarks
If it' not raining,
forbid to keep the
moving status over
1 hour continually.
Preset Mapping
Menu = 95+Preset
Enter = 94+Preset
ESC = 96+Preset
Washer Pump :
EXWJ400-10 is
optional product