Buffalo WLI-CB-G54A Quick Setup Manual page 4

Note: If the Wireless Zero Configuration Service is not functioning, select Start
» Control Panel » Administrative » Tools » Services. Select Automatic
in the Startup type field to enable the Wireless Zero Configuration Service.The
default value is Automatic.
Step
Zero Configuration Service
If the Wireless Zero Config-
uration Service is activated,
Windows will scan for available
wireless access points once the
Wireless Notebook Adapter is
properly installed. If Windows
detects one or more access
points, a
appears in the taskbar. One or
more wireless networks are
available appears as a caption
accompanying the icon.
Right click the networking
icon in the taskbar and select
View Available Wireless
Networks to display a list of
available wireless networks.
(See step 2C if you need to
enter
name or WEP/WPA encryption
key.) Select an access point
network name or ESS-ID and
click the Connect button to
establish a connection.
4
Configuring Wireless
networking
an ESS-ID network
icon