Buffalo WLA2-G54 Quick Setup Manual page 6

54mbps wireless compact repeater bridge-g

Hide thumbs Also See for WLA2-G54:

Connect the AirStation to your existing LAN

Once configuration is complete, connect the AirStation to your existing Local Area

Network. Plug the provided 7ft. Ethernet cable into the 10/100M Ethernet port on

the AirStation 54Mbps Compact Repeater Bridge and plug the other end

into an Ethernet hub or switch on your Local Area Network.

Once the AirStation is connected to the existing LAN, users accessing the

LAN through the AirStation must configure the computer's TCP/IP Settings to

match your existing LAN.

Contact your network administrator if your computer requires a static IP

Address or if using DHCP Services.

This completes the basic AirStation Configuration. To change advanced settings

consult the User Manual located on the Utility CD or the Buffalo Support Web Site:

http://www.buffalotech.com/wireless/support.

MAC Address for WDS Mode

The Wireless MAC address is a 12-

digit code comprised of numbers and let-

ters and is located on the rear of the

AirStation.

The Wireless MAC Address is used for

WDS functionality.

Table of Contents

Airstation g54 wla2-g54