Buffalo HS-D300GL User Manual page 51

documentation for troubleshooting information. Also, verify that the USB cable is securely
fastened to both the printer and the LinkStation. Finally, you may try turning the LinkStation
off, turning the printer off, turning the printer back on, and then turning the LinkStation back on
again.
USB Settings - Delete Print Queue
Deleting print jobs may be
necessary if a corrupt print job
was sent to a printer. If printing
to the printer connected to
LinkStation suddenly fails, it is
recommended that you Execute
the Delete Print Queue program.
Deleting the print jobs will
require that users re-send their
print jobs to the printer.
If there are still problems
printing to the printer, then
check the printer manufacturer's
1