Installing The Brother Software - Brother FAX 2750 Owner's Manual

140
A P P E N D I X A

Installing the Brother Software

1
Insert the Brother CD-ROM into your CD-ROM drive.
2
Enter the command for your version of Windows
After you insert the Brother CD-ROM, you must type the appropriate
command for your version of Windows
If you are using Windows
run: click File, then Run, then type x:SETUP.EXE. ("x" is the drive
letter for your CD-ROM drive.) This will start the Software
Installation program.
If you are using Windows
Version 4.0, the Software Installation program appears
automatically when you insert the Brother CD-ROM.
®
For Windows
you can also click on start at the Desktop, select Run and then enter
x:/SETUP.EXE
The Brother LOGO will be displayed on the screen.
If you are using Windows NT
will appear on the screen:
You are running Windows NT
support this version of Windows NT. YOU MUST UPGRADE TO WINDOWS
NT 4.0 AND REINSTALL MFL Pro!
If you are using Windows NT
the Administrator, an error message will appear explaining the problem.
®
:
®
3.1 or 3.11, from the Program Manager,
®
95, 98 or Windows NT
95, 98 and Windows NT
®
3.51 or earlier, the following error message
®
3.51 or earlier. Brother MFL Pro does not
®
Workstation 4.0 and you are not logged-in as
®
, if needed.
®
Workstation
®
Workstation Version 4.0,