For Dos Users (For Mfc 8300 And Mfc 8600 Only); How To Use Brother Machine With Your Dos Application Software; What Does The Remote Printer Console Do; Remote Printer Console Main Program - Brother FAX4750 Service Manual

13
13
For DOS Users
(For MFC 8300 and MFC 8600 Only)
DOS printing is not available for the FAX 4750.
How to Use Brother machine with Your DOS
Application Software
Before working with your application software that runs on DOS, check
that the Brother machine's name appears in the printer selection of your
application software. If the machine is not listed, you must install the
printer driver that corresponds to HP LaserJet IIP's emulations.
The following table shows combinations of printer drivers and emulation
mode. To get the most out of this machine, you should install an HP
printer driver in your application software.
Printer driver supported in
your application software
HP LaserJet IIP™
HP LaserJet II™
The best or recommended printer driver is indicated in bold.
Be sure to choose the proper printer driver in your application software.
Be sure the printing resolution is set to 300 dpi in your DOS application
software.

What Does the Remote Printer Console Do?

The Remote Printer Console (RPC) is a utility program that can run in the
DOS environment and comprises the following two programs:

Remote Printer Console Main Program

This program allows you to change various printer settings such as
emulation, print quality, fonts, page setup etc., from your computer
screen. Since most DOS applications have a Printer Settings menu that
overrides the settings made by the RPC, you may not have to use this
utility program. This utility program is useful for application software
that does not control the printer's settings and features.
Emulation mode to be selected with
the remote printer console program
HP LaserJet IIP emulation mode
Auto emulation selection
F O R D O S U S E R S 13 - 1