136
A P P E N D I X A
Before You Install the Optional
Multi-Function Link Pro Software
Installation instructions will be included with PCI-2CD. However, it is
important that you hook up your fax machine to your computer before you
install the software.
If You Don't Have a CD-ROM Drive
All optional software is supplied on CD-ROM. If you need a Floppy
Diskette version, you can order it from Brother. (Only Multi-Function Link
Pro and Visioneer PaperPort™ LE are available on Floppy Disks, item
numbers PCI2D31 (for Windows
95, 98). If you are using Windows NT
software is not available on Floppy Disks.) You must tell the Brother
Representative the version of Windows
model number. At the same time, we recommend you order the shielded
IEEE 1284 Bi-directional Cable (UG4558001). To order, call Brother at
1-888-879-3232 (USA) or 1-800-668-2768 (from within Canada).
Computer Requirements
The following are the minimum computer requirements you need to set up
and operate the fax machine as a printer. Use only a shielded interface cable
that is IEEE-1284 compliant, and that is less than 6.0 feet (1.8 meters) long.
CPU
80486/66MHz or higher (Windows
Pentium 75 or Higher (Windows NT
Version 4.0)
RAM
8MB or greater for Windows
8MB or greater for Windows
recommended)
16MB or greater for Windows NT
Version 4.0 (32MB recommended)
Hard Disk Drive
50MB Available Disk Space CD-ROM1
Operating System Windows
4.0, with your Windows
®
3.1 or 3.11) and PCI2D95 (for Windows
®
Workstation Version 4.0, the
®
you are using and your fax machine
®
3.1 or 3.11
®
95, 98 (16MB
®
3.1, 3.11, 95, 98 or NT
®
version
®
®
3.1, 3.11 or 95, 98)
®
Workstation
®
Workstation
®
Workstation Version