Husqvarna SVARTPILEN 401 Owner's Manual page 124

11 TUNING THE CHASSIS
122
–
Position the handlebar.
Info
Make sure the cables and wiring are positioned cor-
rectly.
–
Position handlebar clamp
–
Mount screws
Guideline
F02715-10
Screw, handle-
bar clamp
The markings
to the handlebar support and handlebar clamp.
–
First bolt the handlebar clamp with screws
longer, higher side of handlebar support
parts touch.
Info
The longer, higher side of handlebar support
marked with marking
–
Tighten screws
2
.
1
, but do not tighten yet.
M8 20 Nm (14.8 lbf ft)
B
on the handlebar are aligned centrally
4
A
.
1
evenly.
Loctite ® 243™
1
onto the
so that both
4
is