Encoder Settings; Selecting An Encoder Profile - Bosch NWC-0495-20P Operating Instructions Manual

48 en | Configuration via the browser
Alarm mode stamping
Choose On if a text message should be overlaid in the event of
an alarm. It can be displayed at a position of your choice using
the Custom option. Or it can be set to Off if no overlay of this
information is to be shown.
1.
2.
Displayed alarm message
Enter the message to be displayed for an alarm. It can contain
up to 31 characters.
Video watermarking
Choose On if the video images transmitted are to be water-
marked. After activation, all images are marked with a small
green rectangle. A red rectangle indicates that the sequence
(live or saved) has been manipulated.
7.4

Encoder Settings

For encoding the video signal, you can select two profiles and
change the presets for the profiles.
7.4.1

Selecting an encoder profile

You can adapt the MPEG-4 data transmission to the operating
environment (for example network structure, bandwidth, data
V 2.5 | 2007.6
Select the desired position from the lists.
– If you have selected the Custom option, additional
fields are displayed to specify the exact position
(Position (XY):).
In the Position (XY): fields enter the values for the desired
position.
Operating Instructions
Dinion IP
Bosch Security Systems