Bosch NBC-225-P Installation And Operation Manual
  1. Manuals
  2. Brands
  3. Bosch Manuals
  4. IP Camera
  5. NBC-225-P
  6. Installation and operation manual

Bosch NBC-225-P Installation And Operation Manual

200 series ip camera
Hide thumbs Also See for NBC-225-P:
Table of Contents

Advertisement

Quick Links

IP Camera 200 Series
NBC-225-P
en
Installation and Operation Manual

Advertisement

Table of Contents
loading

Related Manuals for Bosch NBC-225-P

Summary of Contents for Bosch NBC-225-P

  • Page 1 IP Camera 200 Series NBC-225-P Installation and Operation Manual...

  • Page 3: Table Of Contents

    Resetting the camera SD card Mounting the camera Browser connection System requirements Establishing the connection 4.2.1 Password protection in camera Protected network Connection established 4.4.1 LIVEPAGE 4.4.2 RECORDINGS 4.4.3 SETTINGS Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05...
  • Page 4 Encoder Profile 6.4.2 Encoder Streams 6.4.3 Video 6.4.4 Audio 6.4.5 Installer Options Recording 6.5.1 Storage Management 6.5.2 Recording Profiles 6.5.3 Retention Time 6.5.4 Recording Scheduler 6.5.5 Recording Status AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems...

  • Page 5: Ip Camera 200 Series Table Of Contents | En

    System Log / Event Log 7.1.5 Saving snapshots 7.1.6 Recording video sequences 7.1.7 Running recording program 7.1.8 Audio communication Recordings page 7.2.1 Controlling playback Troubleshooting Resolving problems Customer service Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05...
  • Page 6 | Table of Contents IP Camera 200 Series Maintenance Repairs 9.1.1 Transfer and disposal Technical Data 10.1 Specifications 10.1.1 Dimensions 10.1.2 Accessories AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems...

  • Page 7: Safety

    If not avoided, this could result in minor or moderate bodily injury. CAUTION! Low risk: Indicates a potentially hazardous situation. If not avoided, this could result in property damage or risk of damage to the device. Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05...

  • Page 8: Important Safety Instructions

    10. Attachments, changes or modifications - Only use attachments/accessories specified by the manufacturer. Any change or modification of the equipment, not expressly approved by Bosch, could void the warranty or, in the case of an authorization agreement, authority to operate the equipment.

  • Page 9: Fcc & Ices Compliance

    Federal Communications Commission, helpful: How to Identify and Resolve Radio-TV Interference Problems. This booklet is available from the U.S. Government Printing Office, Washington, DC 20402, Stock No. 004-000-00345-4. Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05...
  • Page 10 (FCC), peut s'avérer utile : How to Identify and Resolve Radio-TV Interference Problems. Cette brochure est disponible auprès du U.S. Government Printing Office, Washington, DC 20402, États-Unis, sous la référence n° 004- 000-00345-4. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems...

  • Page 11: Ul Certification

    Please dispose of these devices at an environmentally compatible recycling facility, per European Directive 2002/96/EC More information For more information please contact the nearest Bosch Security Systems location or visit www.boschsecurity.com Bosch Security Systems Installation and Operation Manual...

  • Page 12: Copyrights

    Digital Equipment Corporation not be used in advertising or publicity pertaining to distribution of the software without specific, written prior permission. This software is based in part on the work of the Independent JPEG Group. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems...

  • Page 13: Introduction

    It uses H.264 compression technology to give clear images reducing bandwidth and storage.The camera can be used as a stand-alone video surveillance system with no additional equipment or it can easily integrate with the Bosch Divar 700 Series recorders. Features include: –...

  • Page 14: Unpacking

    Installation should only be performed by qualified service personnel in accordance with the National Electrical Code or applicable local codes. CAUTION! The camera module is a sensitive device and must be handled carefully. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems...

  • Page 15: Installation

    The date/time must be synchronized each time after power on. It is important to ensure that the date/time is correct for recording. An incorrect date/time setting could prevent correct recording. Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05...

  • Page 16: Network (And Power) Connector

    DC12V input. If both are connected and DC power removed, the camera will reboot and will then be powered by PoE. If both are connected and the PoE removed, the camera will continue working. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems...

  • Page 17: I/O Connector

    24 VDC. Max. 1 A continuous, 12 VA. – Trigger in: +9 VDC minimum; +30 VDC maximum. Reverse polarity connection will be inactive. – Alarm input configurable as active low or active high. Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05...

  • Page 18: Audio Connectors

    (7 seconds approximately) until the LED flashes (red) to recall the factory default values. The factory default IP address is 192.168.0.1 Figure 3.5 Reset button AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems...

  • Page 19: Sd Card

    Slide the SD card into the slot. Close and secure the cover. The camera supports most SD/SDHC cards. For a list of recommended cards (not supplied by Bosch), please visit www.boschsecurity.com Mounting the camera The camera can be mounted either from the top or from the bottom (1/4"-20 UNC thread).
  • Page 20 Adjust the ball-socket so that camera mount is correcrly aligned for the required angle. Screw camera onto mount and, when in position, tighten the locking ring (1) securely. Tighten the ball-socket adjustment ring (2) securely. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems...

  • Page 21: Browser Connection

    The camera must be assigned a valid IP address to operate on your network. The default address pre-set at the factory is 192.168.0.1 Start the Web browser. Enter the IP address of the camera as the URL. Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05...

  • Page 22: Password Protection In Camera

    If the connection is not established, the maximum number of possible connections may already have been reached. Depending on the device and network configuration, up to 25 web browsers, or 50 VIDOS or Bosch VMS connections are supported. 4.2.1 Password protection in camera A camera offers the option of limiting access across various authorization levels.

  • Page 23: Connection Established

    Refer to Section 7.2 Recordings page, page 85 for more information. 4.4.3 SETTINGS Click SETTINGS in the application title bar to configure the camera and the application interface. A new page containing Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05...
  • Page 24 Section 6 Advanced Mode, page 30 for more information on advanced settings. Note: It is recommended that only expert users or system administrators use the Advanced Mode. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems...

  • Page 25: Basic Mode

    Note: When entering names do not use any special characters, for example &. Special characters are not supported by the internal recording management system. Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05...

  • Page 26: Device Access

    Define and change a separate password for each level while logged in as service or if the device is not protected by a password. Enter the password for the selected level. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems...

  • Page 27: Date/Time

    Click Sync to PC to apply the system time from your computer to the device. Note: It is important to ensure that the date/time is correct for recording. An incorrect date/time setting could prevent correct recording. Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05...

  • Page 28: Network

    On to activate the automatic acceptance of DHCP-assigned IP addresses. Note: Certain applications (for example, Bosch Video Management System) use the IP address for the unique assignment of the device. If using these applications, the DHCP server must...

  • Page 29: Encoder Profile

    This page provides general information on the hardware and firmware system, including version numbers. No items can be changed on this page but they can be copied for information purposes when troubleshooting. Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05...

  • Page 30: Advanced Mode

    Note: When entering names do not use any special characters, for example &. Special characters are not supported by the internal recording management system. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems...

  • Page 31: General

    Assign a camera name to assist in identifying it. The name simplifies the management of multiple devices in more extensive systems, for example the VIDOS or Bosch VMS software. The camera name is used for remote identification, for example, in the event of an alarm. Enter a name that makes it as easy as possible to identify the location unambiguously.

  • Page 32: Date/Time

    Enter the current date. Since the device time is controlled by the internal clock, it is not necessary to enter the day of the week – it is added automatically. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems...
  • Page 33 If there are empty lines at the bottom of the table, for example after deletions, add new data by marking the row and selecting values from the list boxes. Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05...

  • Page 34: Display Stamping

    If the Custom option is selected, enter values in the X and Y position fields. Display milliseconds If necessary, display milliseconds for Time stamping. This information can be useful for recorded video images; however, AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems...
  • Page 35 Select On for the transmitted video images to be watermarked. After activation, all images are marked with a green W. A red W indicates that the sequence (live or saved) has been manipulated. Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05...

  • Page 36: Web Interface

    Enter the path for a suitable image for the device logo in this field. The image can be stored on a local computer, a local network, or at an Internet address. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems...

  • Page 37: Livepage Functions

    The system messages are displayed with the date and time in a field next to the video image and provide information about the establishment and termination of connections, etc. Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05...

  • Page 38: Logging

    File for system log Enter the path for saving the system log here. If necessary, click Browse to find a suitable folder. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems...

  • Page 39: Camera

    VGA resolution for DSL connections at 500 kbps maximum – ISDN (2B) QVGA resolution for ISDN connections at 100 kbps maximum – ISDN (1B) QVGA resolution for ISDN connections at 50 kbps maximum Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05...
  • Page 40 I-frames and P-frames, this can result in individual images being skipped. The value entered here must be at least 10% higher than the value entered in the Target data rate field. If the value entered AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems...
  • Page 41 A value of 51 results in a very high refresh rate and lower image quality. Default Click Default to return the profile to the factory default values. Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05...

  • Page 42: Encoder Streams

    Click Preview << to close the preview displays. Note: Deactivate the display of the video images if the performance of the computer is adversely affected by the decoding of the data stream. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems...

  • Page 43: Video

    The green gain adjustment offsets the factory white point alignment to optimize the white point. B-gain The blue gain adjustment offsets the factory white point alignment (reducing blue introduces more yellow). Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05...

  • Page 44: Audio

    Switch the Audio output On or Off. 6.4.5 Installer Options Disable the Camera LED on the camera to switch it off. Enable Mirror image to obtain a mirror image display of the camera picture. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems...

  • Page 45: Recording

    MP, T:80Kb, M:100Kb) Note: The recording hours table is only an indication for reference, an actual situation might be different (because of different scenes or networking status for example). Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05...

  • Page 46: Storage Management

    A Video Recording Manager (VRM) can control all recording when accessing an iSCSI system. The VRM is an external program for configuring recording tasks for video servers. For further information, contact your local customer service at Bosch Security Systems. 6.5.1 Storage Management Device manager...
  • Page 47 Recording 1 corresponds to stream 1, Recording 2 corresponds to stream 2. Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05...
  • Page 48 Click a storage medium in the Managed storage media list to select it. Click Remove below the list. The storage medium is deactivated and removed from the list. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems...

  • Page 49: Recording Profiles

    – Pre-alarm: recording takes place in the pre-alarm time, during the alarm and during the post-alarm time only. – Off: no automatic recording takes place. Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05...

  • Page 50: Retention Time

    VGA for complete frame rate and high image quality. Enter the required retention time in hours or days for each recording. Recording 1 corresponds to Stream 1, Recording 2 corresponds to Stream 2. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems...

  • Page 51: Recording Scheduler

    Click the date to be deleted. Click OK. The selection is removed from the table and the window is closed. Repeat for any other dates to be deleted. Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05...

  • Page 52: Recording Status

    The graphic indicates the recording activity. An animated graphic is seen when recording is taking place. 6.5.5 Recording Status Details of the recording status are displayed here for information. These settings cannot be changed. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems...

  • Page 53: Alarm

    Only ten passwords can be defined here. Define a general password if more than ten connections are required, for example, when connections are initiated by a controlling system such as VIDOS or Bosch Video Management System. Bosch Security Systems Installation and Operation Manual...
  • Page 54 Decoder in the receiver that is to be used to display the alarm image. Refer to the destination device AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems...
  • Page 55 Select On to automatically re-established a connection to one of the previously specified IP addresses after each reboot, connection breakdown, or network failure. Audio Select On to transmit the audio stream with an alarm connection. Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05...

  • Page 56: Video Content Analyses (Vca)

    This can lead to impairment of the VCA system. Observe the processor load and optimize the encoder settings or the VCA settings if necessary, or turn off VCA completely. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems...

  • Page 57: Vca Configuration- Profiles

    Analysis type Select the required analysis algorithm. By default, only Motion+ is available — this offers a motion detector and essential recognition of tampering. Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05...
  • Page 58 Specify the number of sensor fields that a moving object must cover to generate an alarm. This setting prevents objects that are too small from triggering an alarm. A minimum value of 4 is AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems...
  • Page 59 Sensitivity and Trigger delay (s) can only be changed if Reference check is selected. Sensitivity The basic sensitivity of the tamper detection can be adjusted for the environmental conditions to which the camera is Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05...
  • Page 60 Activate this function if tampering associated with covering the objective (for instance, by spraying paint on it) should trigger an alarm. The average brightness of the scene provides a basis for recognition. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems...
  • Page 61 Selecting the area Select the image areas in the reference image that are to be monitored. The video image is subdivided into square fields. Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05...
  • Page 62 Right-click any fields to deactivate. Click OK to save the configuration. Click the close button (X) in the window title bar to close the window without saving the changes. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems...

  • Page 63: Vca Configuration - Scheduled

    Assign the individual holidays to the VCA profiles, as described above. Deleting Holidays Delete defined holidays at any time: Click Delete. A new window opens. Click the date to delete. Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05...
  • Page 64 | Advanced Mode IP Camera 200 Series Click OK. The item is deleted from the table and the window closes. The process must be repeated for deleting additional days. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems...

  • Page 65: Vca Configuration - Event Triggered

    A delay period may be useful in avoiding false alarms or frequent triggering. During the delay period, the Silent MOTION+ configuration is always enabled. Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05...

  • Page 66: Audio Alarm

    Name The name makes it easier to identify the alarm in extensive video monitoring systems, for example with the VIDOS and Bosch Video Management System programs. Enter a unique and clear name here. Signal Ranges Exclude particular signal ranges in order to avoid false alarms.

  • Page 67: Alarm E-Mail

    Obtain information on operating your cellphone from your cellphone provider. Attach JPEG from camera Check the box to specify that JPEG images are sent from the camera. Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05...
  • Page 68 This makes it easier to identify the origin of the e-mail. Test e-mail Click Send Now to test the e-mail function. An alarm e-mail is immediately created and sent. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems...

  • Page 69: Interfaces

    10 s. Relay follows If required, select a specific event that will trigger the relay. The following events are possible triggers: Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05...
  • Page 70 Trigger relay Click the button to switch the relay manually (for example, for testing purposes or to operate a door opener). AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems...

  • Page 71: Network

    If a DHCP server is employed in the network for the dynamic assignment of IP addresses, activate acceptance of IP addresses automatically assigned to the device. Certain applications (VIDOS, Bosch Video Management System, Archive Player, Configuration Manager) use the IP address for the unique assignment of the device. If using these...
  • Page 72 Control Panel of the Windows Control Panel). To limit connections to SSL encryption, set the Off option in the HTTP browser port, the RCP+ port, and Telnet support. This AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems...
  • Page 73 Internet using a host name, without having to know the current IP address of the device. Enable this service here. To do this, obtain an account with DynDNS.org and register the required Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05...
  • Page 74 To transfer the IP address of the device, click the Register button. Status The status of the DynDNS function is displayed here for information purposes; these settings cannot be changed. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems...

  • Page 75: Advanced

    Enter the user name that the Radius server uses for the camera in the Identity field. Enter the Password that the Radius server expects from the camera. Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05...

  • Page 76: Multicasting

    Multicast Address Enter a valid multicast address to be operated in multicast mode (duplication of the data stream in the network). With the AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems...

  • Page 77: Jpeg Posting

    When setting this parameter, ensure that the date and time of the device are always set correctly . For eample, the file snap011005_114530.jpg Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05...
  • Page 78 FTP server password Enter the password that gives access to the FTP server. Path on FTP server Enter an exact path to post the images on the FTP server. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems...

  • Page 79: Service

    The latest firmware can be obtained from your customer service center or from the Bosch Security Systems download area. To update the firmware: First, store the firmware file on your hard disk.
  • Page 80 Once all files have been successfully uploaded, the device must be rebooted. In the address field of the browser, enter /reset after the camera's IP address, for example: 192.168.0.10/reset AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems...

  • Page 81: System Overview

    Keep this information at hand when seeking technical support. Select the text on this page with a mouse and copy it so that it can be pasted into an e-mail if required. Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05...

  • Page 82: Operation Via The Browser

    When accessing the camera with a browser, the processor load and network information is available in the upper right of the window next to the Bosch logo. Move the mouse cursor over the icons to display numerical values. This information can help with problem solving or when fine tuning the device.

  • Page 83: Image Selection

    The storage location depends on the configuration of the camera. 7.1.6 Recording video sequences Sections of the video sequence that is currently being shown on the Livepage can be saved on the computer's hard drive. The Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05...

  • Page 84: Running Recording Program

    Click the recording icon again to stop recording. Play back saved video sequences using the Player from Bosch Security Systems. 7.1.7 Running recording program The hard drive icon below the camera images on the Livepage changes during an automatic recording.

  • Page 85: Recordings Page

    1 and 2 are identical, only the quality and locaction may be different.) Figure 7.2 Recordings window Note: Install the BVIP Lite Suite on your PC to ensure that the Recordings page is displayed correctly. Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05...

  • Page 86: Controlling Playback

    Jump to start of active sequence or to previous sequence Jump to start of the next video sequence in the list Slide control Continuously select playback speed by means of the speed regulator: AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems...
  • Page 87 To do this, place the mouse cursor in the timeline below the timescale and turn the scroll wheel. Playback is automatically stopped (paused) during scrolling. Trick mode requires significantly higher memory capacity and computing power. Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05...

  • Page 88: Troubleshooting

    Customer service If a fault cannot be resolved, please contact your supplier or system integrator, or contact Bosch Security Systems Customer Service directly. The Installer should write down all information regarding the unit so that it can be referenced for warranty or repair. The...

  • Page 89: Maintenance

    Defective or superfluous devices and parts should be disposed of professionally or taken to your local collection point for hazardous materials. Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05...

  • Page 90: Technical Data

    G.711 SD card slot Supports up to 32 GB SD/SDHC card Recording Continuous recording, ring recording. alarm/ events/schedule recording Unit Configuration Via web browser or PC surveillance software AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems...
  • Page 91 0 ºC to +40 ºC (+32 ºF to +104 ºF) Temperature (Power supply) Storage -20 ºC to +70 ºC (-4 ºF to +158 ºF) Temperature Humidity 10% to 80% relative humidity (non condensing) Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05...

  • Page 92: Dimensions

    Accessories – Indoor mounting brackets – Archive Player Export License Contact a Bosch representative in your area for the latest available accessories or visit our website at www.boschsecurity.com AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems...
  • Page 94 Bosch Security Systems www.boschsecurity.com © Bosch Security Systems, 2010...

This manual is also suitable for:

200 series nbc-255-p

Table of Contents