Glossary - Bosch NWC-0495-20P Operating Instructions Manual

110 en | Glossary
13

Glossary

Brief explanations of some of the terms and abbreviations
found in this user guide are given below.
10/100 Base-T
802.1x
ARP
Baud
Bit/s
CIF
DNS
DHCP
FTP
Full duplex
Gateway
GOP
HTTPS
HTTP
ICMP
ID
IEEE
IGMP
Internet Protocol
V 2.5 | 2007.6
IEEE 802.3 specification for 10 or 100 MBit/s Ethernet
The IEEE standard, 802.1x, provides a general method of
access control and authorization for IEEE 802-based net-
works. An authenticator provides authentication by access-
ing an authentication server (see RADIUS server) to check
connection requests, and grants or refuses access to the
available services (LAN, VLAN, WLAN).
Address Resolution Protocol: a protocol for mapping MAC
and IP addresses
Unit of measure for the speed of data transmission
Bits per second, the actual data rate
Common Intermediate Format,
video format with 352 x 288/240 pixels
Domain Name Service
Dynamic Host Configuration Protocol allows a network
device to receive a dynamically allocated IP address and
other network parameters from a server in a network.
File Transfer Protocol
Simultaneous data transmission in both directions (sending
and receiving)
Access point to another LAN (subnet)
Group of pictures
Hypertext Transfer ProtocoL Secure provides secure trans-
fer of data between web sever and web browser.
Hypertext Transfer Protocol
Internet Control Message Protocol
Identification: a machine-readable character sequence
Institute of Electrical and Electronics Engineers
Internet Group Management Protocol
The main protocol used on the Internet, normally in con-
junction with the Transfer Control Protocol (TCP):
TCP/IP
Operating Instructions
Dinion IP
Bosch Security Systems