Specifications - Sony DPP-FP97 Operating Instructions Manual

Specifications

x Printer
Printing method
Dye sublimation printing (Yellow/
Magenta/Cyan 3 pass)
Resolution
300 (H) 300 (V) dpi
×
Image processing per dot
256 levels processing (8 bits for each
Yellow/Magenta/Cyan)
Printing range
1 800 dots × 1 200 dots
Printing size
P (4 × 6 inch) size:
101.6 152.4 mm (maximum,
×
borderless)
Printing time (per sheet)
Memory card/Internal memory
Approx. 45 sec.
*3*5
PictBridge :
Approx. 58 sec.
Via PC *6 : Approx. 45 sec.
Input/Output connectors
HDMI OUT (output) connector
A-TYPE connector,
1 080i (59.94Hz)/1 080i (50Hz)/576p
(50Hz)/480p (59.94Hz) compatible,
"BRAVIA" Sync compatible
USB (Hi-Speed USB) for PC connection
PictBridge/EXT INTERFACE connector
Slot
"Memory Stick" media insertion slot
SD memory Card/xD-Picture Card
insertion dual-format slot
CompactFlash card insertion slot
GB
82
Compatible image file formats
Maximum number of pixels to be
handled
File system
Image file name
Internal memory
*1*2*3*4
:
Maximum number of files to be handled
Ink ribbon/Print Paper
LCD screen
Power requirements
Power consumption
Operating temperature
JPEG: DCF 2.0 compatible, Exif 2.21
compatible, JFIF
TIFF: Exif 2.21 compatible
*8
BMP : 1, 4, 8, 16, 24, 32 bits Windows
format
Some image file formats are not
compatible.
8 192(H) × 6 144(V) dots
(Excluding "Index Print" and part of
"CreativePrint")
FAT12/16/32, sector size 2048 bytes or
smaller
DCF format, 256 characters 8th or less
hierarchy
Approx. 20 MB
When measuring media capacity, 1 MB equals 1
million bytes, a portion of which is used for data
management.
9 999 files for a memory card/external
device
Refer to supplied "About the Print Packs."
LCD panel:
8.8 cm (3.5 type) TFT drive
Total number of dots:
230 400 (320 RGB × 240)
DC IN jack, 24 V
While printing: 83 W (maximum)
On standby mode: less than 1W
5 °C to 35 °C (41 °F to 95 °F)
*7