Sony DPP-FP97 Operating Instructions Manual page 74

Symptom
The printer does
not respond to the
printing order
from the PC.
An image is
printed with
borders even if I
select
"Borderless."
Print quantity
specified in the
"Pages Per Sheet"
in the "Layout" tab
of the "Sony DPP-
FP97 Properties"
dialog box does
not match the
actual print
quantity and
printed results.
Colors of the
printed image
from a PC are
different from
those printed from
a memory card.
An error stating
"Error was found
while a document
is output to the
USB device." is
displayed.
74 GB
Check
—
• Are you using an application
software other than PMB?
—
—
—
Cause/Solutions
c If there is no trouble displayed on the
Windows desktop, check the printer's
LCD screen.
If the printer shows trouble, do the
following:
1. Turn off the 1 (on/standby) button of
the printer.
2. Disconnect the power cable, wait for 5
to 10 seconds, and then connect the
cable again.
3. Restart your computer.
If these do not solve the problem, consult
with your Sony dealer or service facilities.
c When using an application other than the
PMB, an image might be printed with
borders even if you select borderless print.
When you can set border/borderless with
an application, set an image to be printed
fully in the print range even if it is printed
over the range.
c Depending on the application you use, the
print quantity setting of the application
you use may have priority over the setting
specified in the printer driver dialog box.
c Since the process in printing an image
from a memory card differs that in
printing from a PC, the colors may not be
exactly identical.
c Disconnect the USB cable and then
connect it again.