Main Switch; Power Trim And Tilt Switch On Remote Control Or Tiller Handle - Yamaha FT60B Owner's Manual

EMU26090

Main switch

The main switch controls the ignition system;
its operation is described below.
" " (off)
G
With the main switch in the "
tion, the electrical circuits are off, and the key
can be removed.
" " (on)
G
With the main switch in the "
tion, the electrical circuits are on, and the key
cannot be removed.
" " (start)
G
With the main switch in the "
sition, the starter motor turns to start the en-
gine. When the key is released, it returns
automatically to the "
" (off) posi-
" (on) posi-
" (start) po-
" (on) position.
Basic components
OFF
EMU26141
Power trim and tilt switch on remote
control or tiller handle
The power trim and tilt system adjusts the
outboard motor angle in relation to the tran-
som. Pressing the switch "
outboard motor up, then tilts it up. Pressing
the switch " " (down) tilts the outboard mo-
tor down and trims it down. When the switch
is released, the outboard motor will stop in its
current position.
NOTE:
For instructions on using the power trim and
tilt switch, see pages 29 and 31.
ON
START
ZMU03590
" (up) trims the
12