Installation Requirements; Boat Horsepower Rating; Mounting Outboard Motor; Digital Electronic Control Requirements - Yamaha F150 Owner's Manual

Propeller mark:
M/T (F150CA, F175CA, F200CA)
ML/TL (LF150CA, LF175CA, LF200CA)
Fuel and oil:
Recommended fuel:
Mid-grade unleaded gasoline (For North
America), Premium unleaded gasoline
(F200CA, LF200CA)
Regular unleaded gasoline (F150CA,
F175CA, LF150CA, LF175CA)
Min. pump octane number (PON):
86 (F150CA, F175CA, LF150CA,
LF175CA)
89 (F200CA, LF200CA)
Min. research octane number (RON):
90 (F150CA, F175CA, LF150CA,
LF175CA)
94 (F200CA, LF200CA)
Recommended engine oil:
YAMALUBE 4M FC-W or 4-stroke
outboard motor oil
Recommended engine oil grade 1:
SAE 10W-30/10W-40/5W-30
API SE/SF/SG/SH/SJ/SL
Engine oil quantity (without oil filter
replacement):
4.3 L (4.55 US qt, 3.78 Imp.qt)
Engine oil quantity (with oil filter
replacement):
4.5 L (4.76 US qt, 3.96 Imp.qt)
Lubrication system:
Wet sump
Recommended gear oil:
Yamalube Marine Gearcase Lube HD or
Hypoid gear oil
Recommended gear oil grade:
SAE 90 API GL-4 / SAE 80W API GL-5 /
SAE 90 API GL-5
Specifications and requirements
EMU33556
EMU33566

Boat horsepower rating

EWM01561
Overpowering a boat can cause severe in-
stability.
Before installing the outboard motor(s), con-
firm that the total horsepower of your out-
board motor(s) does not exceed the boat's
maximum horsepower rating. See the boat's
capacity plate or contact the manufacturer.
EMU40491

Mounting outboard motor

EWM02501
 Improper mounting of the outboard mo-
 Because the outboard motor is very
Your dealer or other person experienced in
proper rigging should mount the outboard
motor using correct equipment and complete
rigging instructions. For further information,
see page 56.
EMU34954
The digital electronic control is equipped with
a start-in-gear protection device(s). This de-
vice prevents the engine from starting unless
it is in neutral.
Gear oil quantity:
0.980 L (1.036 US qt, 0.862 Imp.qt)

Installation requirements

WARNING
WARNING
tor could result in hazardous conditions
such as poor handling, loss of control,
or fire hazards.
heavy, special equipment and training is
required to mount it safely.
Digital electronic control re-
quirements
17