Honeywell MeshGuard LEL IR User Manual page 7

MeshGuard LEL IR & CO2 IR User's Guide
Intrinsically Safe Marking
FTD-3000 LEL Certification
INMETRO: BR Ex ia IIC T4
CEPEL 10.1925X
Cl. I, Div. 1, Gr A, B, C, D T4
Ta = -40° C to +50° C
IECEx SIR 19.0014X
Sira 19ATEX2035X
Ex ia IIC T4 Ga
Ex ia I Ma
2460
Ui = 3.6V, Ci=86µF, Li/Ri=3.5µH/ohm
Warning:
For LEL, cCSAus certification only applies for fixed installations.
FTD-3000 CO certification
2
INMETRO: BR Ex ia IIC T4
CEPEL 10.1925X
Cl. I, Div. 1, Gr A, B, C, D T4
-20° C ≤ Ta ≤ +50° C
IECEx SIR 19.0014X
Sira 19ATEX2035X
Ex d ia IIC T4 Gb
Ex d ia I Ma
2460
Ui = 3.6V, Ci=86µF, Li/Ri=3.5µH/ohm
Substitution of components may impair suitability for intrinsic safety. Replace batteries only in non-hazardous
locations.
To prevent ignition of flammable or combustible atmospheres, disconnect power before servicing.
Proper Product Disposal At End Of Life
EU Directive 2012/19/EU: Waste Electrical and Electronic Equipment (WEEE)
This symbol indicates that the product must not be disposed of as general industrial or domestic
waste. This product should be disposed of through suitable WEEE disposal facilities. For more
information about disposal of this product, contact your local authority, distributor, or the
manufacturer.
WARNING!
WARNING!
7