AEG CTV 3204 LED Instruction Manual page 43

12.2 On Time and Off Time
On Time and Off Time define the time when the TV set turns on and off. You can define different periods.
NOTE:
These functions turn your TV set on from standby mode or into standby mode. If your TV set is turned off with the main
switch this functions is invalid.
1. Press the TV MENU button to display the OSD main menu.
2. Press the arrow button until the menu TIME is activated.
3. Press the arrow button to highlight Off Time or On Time.
4. Press OK to access the function.
5. Press the arrow buttons to highlight and change the displayed functions.
Off Time:
- Off Time: Define if the setting is to be performed once or regularly. Select
between: (Off, Once, Daily, Mon-Fri, Mon-Sat, Sat-Sun or Sun)
- Hour / Minute: Set the off time.
On Time:
- On Time: Define if the setting is to be performed once or regularly. Select
between: (Off, Once, Daily, Mon-Fri, Mon-Sat, Sat-Sun or Sun)
- Hour / Minute: Set the on time.
- Mode: DTV - if DVBT antenna is connected / ATV - if external antenna or
cable tuner is connected.
- Channel: Set the channel number that the TV set turns on with.
- Volume: Set the volume that the TV set turns on with.
6. Press TV MENU to exit the menu and save the settings.
12.3 Sleep Timer
You can set your TV set to automatically turn off after a preset period of time. The sleep timer is deleted and must be set
again if you turn the TV set off during sleep timer setting. Set the sleep timer interval between Off and 240 Min.
• Repeatedly press the SLEEP button on the remote control until the desired time is displayed. The menu disappears
after a few seconds and the TV set turns off after the preset interval.
NOTE: You can also perform this setting in the TIME menu.
12.4 Auto Sleep (Auto Sleep)
With auto sleep activated the TV set automatically turns into standby mode after not receiving a signal for 10 minutes.
1. Press the TV MENU button to display the OSD main menu.
2. Press the arrow button until the menu TIME is activated.
3. Press the arrow button to highlight Auto Sleep.
4. Press OK to on or off the function.
5. Press EXIT to exit the menu and save the changes.
12.5 Time Zone
1. Press the TV MENU button to display the OSD main menu.
2. Press the arrow button until the menu TIME is activated.
3. Press the arrow button to highlight Time Zone.
4. Press OK. Press the arrow buttons / / / to select the desired time zone.
5. Press EXIT to exit the menu and save the changes.
English
43