Basic Operation; Turn Tv Set On/Off; Select Channel; Adjust Volume - AEG CTV 3204 LED Instruction Manual

English
34

6. Basic Operation

All settings can be performed comfortably with the remote control and the OSD menu. The basic functions can also be
performed with the buttons on the TV set. In this user manual we generally describe operation with remote control.

6.1 Turn TV Set On/Off

• Turn the device on with the power switch located at the right bottom of the device. It starts in the previously selected
mode and selected source. In standby mode (status indicator red) press the POWER
The control lamp lights up blue and the device is turned on.
• Press the POWER button on the remote control to turn the device off again (standby mode).
• Use the power switch at the bottom right side to completely turn off the device.
NOTE:
Turn the TV set off completely if you are not using it, as it uses a small amount of power in standby mode. Even after
turning the device off with the main switch it is not completely disconnected from mains power supply. For this you
must disconnect the power plug from the wall outlet.

6.2 Select Channel

• Press the CH +/- buttons or numeric buttons 0-9 to select the desired channel.
• Press the RECALL button on the remote control to return to the previous channel.
• Press CH.LIST to display the channel list. Press the arrow buttons (
display the channel on screen.

6.3 Adjust Volume

• Press the VOL +/- buttons to adjust the volume.
• Press the MUTE button to temporarily mute the sound. Press MUTE or VOL + to unmute the sound again.

6.4 Shortcuts

AUDIO Select audio language (only if supported by broadcaster)
SOURCE Select external device
PIC Select picture mode
SOUND Select sound mode
SLEEP Set sleep timer
ASPECT Select aspect ratio
TEXT Access Teletext
INFO Display channel information
SUBTITLE Select subtitle language (only if supported by broadcaster)

6.5 OSD Menu Structure

The OSD (On Screen Display) menu serves to select and set the different functions.
button on the remote control.
) to highlight a channel and press OK to
1. Press the TV MENU button to display the OSD menu.
See main menu items below.
2. First press / . to select the desired main menu
item. The submenus are displayed next to them.
3. Press / to select a submenu and press OK to
confirm.
4. Press the MENU button to return to the main menu.