6.3
Operation Check of the Code Reader (TCP/IP
Communications)
This section checks whether communications are performed between the master station and the code reader normally.
Configure the system as shown below.
For the communication setting, refer to Page 18 Communication Settings on GX Works3.
(1)
Ethernet
(1) Built-in Ethernet port
(2) Master station (station number 0)
(3) Remote station (station number 1)
(4) Local station (station number 2)
(5) General-purpose switching hub
(6) Code reader
1.
Place the QR code (Page 8 Sample QR code for the code reader) in front of the code reader.
2.
On GX Works3, select [Online] on the menu bar [Monitor] [Device/Buffer Memory Batch Monitor].
(2)
(3)
6.3 Operation Check of the Code Reader (TCP/IP Communications)
(4)
TCP/IP communications
(5)
(6)
6 OPERATION CHECK
37
6