AEG UPS IST3 1-10kVA User Manual page 25

If UPS is OK, dismantle four hexagonal bolts M8×20 (two pieces on the left and right side respectively)
between the anchor frame and anchor support plate.
Move UPS to floor and fasten it.
 After putting UPS in the floor, you can move it by four Omni-directional wheels at the
bottom of UPS. When moving UPS, the Omni-directional wheels should be at ON position.
After moving UPS, the Omni-directional wheels should be at OFF position to avoid UPS
moving.
26
Appearance after unpacking
Dismantle the hexagonal bolts
(1-10kVA) UPS IST3
User Manual