Table of Contents
Advertisement
1.无水位调节功能。
注意
2.自动设置为高水位。
22
Control Panel Functions
Control Panel
POWER:
Plug the power cord, press this button, the power will be connected. Press this
button again to shut the power off.
CAUTION:
1. Press POWER button to activate power, it will turn off automatically after 5
minutes of inactivity.
2. Press START/PAUSE button when machine operates, it will turn off
automatically after 10 minutes of inactivity.
Connect power and press this button, the chosen program will start running.
START/PAUSE:
Press again, chosen program will pause.
*STANDARD:
Default program, suitable for daily soiled clothing like shirt and pants.
Strong washing flow, suitable for towel and other heavy clothing.
HEAVY:
Suitable for silk or other delicate clothing.
GENTLE:
Low water level, suitable for less dirty or light clothing.
QUICK WASH:
An additional washing program, only suitable for STANDARD and HEAVY mode.
SOAK:
After selecting, SOAK will light up together with the chosen program. Display
shows "JP". When soaking, tub rotates discontinually. Soaking time sets
automatically according to water level, manual setting is not available. Soaking
time for water level LOW and E.LOW:20 minutes; water level HIGH and MID:30
minutes.
WASH:
Select for wash program.
Select for rinse program.
RINSE:
SPIN:
Select for spin program.
SAFETY LOCK:
All buttons will not function under safety lock mode, except to unlock. Alarm
beeps when lid is open under safety lock mode. For safety purpose, washer will
drain the water if lid opens for too long.
TUB CLEAN:
This function is to wash the inner tub, do not put any clothes when you
activate this function. For better cleaning result, you may add detergent
for cleaning tub.
WATER LEVEL:
Choose the suitable water level according to load size. (E.LOW~HIGH)
PRESET:
Select suitable preset time (1~24 hours).
Preset time is to decide when to start washing. If the schedule time is set 1 hour,
program will start washing after 1 hour. PRESET is an additional function on top
of other features.
*Power on, press PROGRAM button for 3 seconds (there will be a sound of "beep", water level will be in HIGH).
Then press START to enter Water Efficiency mode. This nominated mode is recommended for normally soiled load equal
to the rated capacity in the product literature.
・ Fuzzy program starts display with "- -"
・ When program is running, display shows remaining time (Rem) in "minute"
・ When PRESET mode operating, display shows preset time (Preset) in "hour"
・ When SOAK mode operating, display shows "JP"
・ When error occurs, display shows error code, see page 13
TUB
CLEAN
7
Hide quick links:
Advertisement
Table of Contents
