Cleaning And Maintenance - Sharp ESX156 Operation Manual

Cleaning and Maintenance

Cleaning Water Inlet
After long usage time, water inlet filter may be blocked by dirt. Please follow instructions below to clean the filter:
1. Shut off the 2. Switch power on, 3. Press Start/Pause
press Water Level button.
water faucet,
lift the hose button. Caution: Switch
up. power off after few
seconds.
Cleaning Lint Filter
1. Detach the filter from the 2. Remove the net from the filter and
washing machine.
turn it inside out. Clean the net with
clean water and restore it to the filter.
Maintenance
1. After wash course ends, turn off the water tap, shut the power off. Remove water
inlet hose if necessary.
2. Please drain the tub completely. Make sure the tub is dry and there is no water
residue.
3. Unplug the washer before maintenance.
4. Hang the hose and power cord properly.
5. Use a soft cloth to wipe away the water and stain inside the tub, open the lid for 1
hour then close the lid back.
6. Use a soft cloth to clean the water and stain on the washer body. To avoid damage
to the body, do not use detergents, solvents , etc.
12
Proper care of your washer can extend its life.
water inlet valve
4. Remove water inlet 5. Clean the inlet
hose. valve filter.
Caution: Do not twist Caution: The filter
the hose. can be removed and
washed.
Clean it at least once a week.
3. Attach the filter back into
the washing machine.
本机
洗衣 粉
柔 顺剂
洗 涤液
投放 盒
投 放盒
投 放盒
附件 清 单
螺 钉
洗涤剂盒
17