Buffalo 320 Manual page 6

Strap Kit
1. Position the toe (short) and arch (long) straps on the footplates
with the fasteners on the same side as the strut tube.
2. Feed the ends of both straps over and through the Safety
Anchor Slot System and secure the straps with the strap plate &
screws provided.
3. Set spring adjusters to minimum compression. Set adjustable
stilt legs to the lowest setting and tighten wing bolts.
Re-check all the components you have assembled. Reposition
4.
the tube clamps and leg bands until you feel totally comfortable.
You should stand straight on your stilts so the stilts don't pull in
or out.