Buffalo 320 Manual page 3

DO...
• Inspect stilts thoroughly before use, making sure that
construction is free from damage and hazards, that there is
no excessive wear at the connection points, and that all bolts
are tight. Special attention should be given to the entire strut
tube assemblies and wing bolts in this respect.
• Walk only on suitable hard surface which is level.
• Be cautious when working around low profile furniture,
fixtures, pipes, etc.
• Fasten the upper leg strap first when putting on stilts.
• Disconnect upper leg straps last when removing stilts.
• Replace any damaged or excessively worn stilt components
before use.
• Remove stilts to adjust them unless assisted by another
person.
• Remove stilts when moving up and down stairs.
• Cover any floor openings.
• Get help when retrieving objects from the floor. If no one is
around remove them completely.
• Keep all straps tightly fastened and secured.
• Take short steps, making sure that the stilts are raised well
clear of the floor with each step.
• Walk forward only, making a "U" turn to change direction.
• Adjust Stilts whenever necessary to ensure it is safe.
Always watch where you are walking.
•