Table of Contents
Advertisement
4-3-3.
Final Inspection
Confirm There is No Fault in Actual Motion/Actual Screen
Inspect it as follows when you exchange parts in the lens block.
1.
Zoom motion (Check five postures: horizontal, upward/downward, upper/lower oblique 45º)
No abnormal sound or motion must be found over full stroke between TELE end and WIDE end.
2.
Zoom image
No abnormality such as a skipped image or wavy image must be found in the image through LCD or finder over
full stroke between TELE end and WIDE end.
3.
Appearance condition
Scratches or stains must not be noticeable, except that the customer permits them.
4.
Foreign matters on the lens
The lens condition must not be worse than that when the camera was received from the customer.
Lens at WIDE end
Full stroke check
Lens at TELE end
Inspection When Cam Tube Block Assy or Straight Tube Lubricated Assy is Replaced
Focus check
1.
Preparation
• Camera installed re-assemble lens.
• Chart (Printed PDF file at the same magnification) (Refer to <Reference>)
• Tripod
• Mirror (ex. CD)
• Memory card
• PC
DSC-HX350
Upper oblique 45°
Horizontal
Lower oblique 45°
Upward
Downward
4-32
Hide quick links:
Advertisement
Table of Contents
