Final Inspection - Sony DSC-QX10 Service Manual

4-4-2. Final Inspection

(1) Confirm There Is No Fault In Actual Motion/Actual Screen
Inspect it as follows when you exchange parts in the lens block.
Zoom motion (Check five postures: horizontal, upward/downward, upper/lower oblique 45º)
1
No abnormal sound or motion must be found over full stroke between TELE end and WIDE end.
Zoom image
2
No abnormality such as a skipped image or wavy image must be found in the image through LCD or finder over full stroke between
TELE end and WIDE end.
Barrier (Check five postures: horizontal, upward/downward, upper/lower oblique 45º)
3
The barrier must be opened and closed fully, free from a sticking in the midway.
No abnormal sound must be heard during the operation.
Appearance condition
4
Scratches or stains must not be noticeable, except that the customer permits them.
Foreign matters on the lens
5
The lens condition must not be worse than that when the camera was received from the customer.
Lens at WIDE end
Full stroke check
Lens at TELE end
DSC-QX10
Horizontal
Lower oblique
4-18
Upward
Downward