Mirror Settings - Panasonic GA-ML Series Manual

11.3

Mirror Settings

Use the following window to implement the settings on a port mirror and
display its settings.
Choose Monitoring > Mirror Settings to display the following window.
In the section of RSPAN VLAN Settings, you can configure the following
parameter.
VID List
Click Apply to add the new entry.
Click Delete to delete entries based on the information specified.
Figure 11-8 Mirror Settings
Parameter
Enter the RSPAN VLAN ID you use. You can enter its
consecutive VLAN IDs, by delimiting with a comma, or
you can enter the range of VLAN IDs by delimiting with
a hyphen. The range is from 2 to 4,094.
11 Monitoring
11.3 Mirror Settings
Overview
396