Error Disable Settings - Panasonic GA-ML Series Manual

3.3.5

Error Disable Settings

Use the following window, and then implement the settings on the error
disable feature to display its settings.
Choose System > Port Configuration > Error Disable Settings to
display the following window.
In the section of the configuration of Error Disable Recovery, you can
configure the following parameters.
Parameter
ErrDisable Cause
Condition
Interval
Click Apply to reflect the change.
Figure 3-7 Error Disable Settings
Choose the cause of the error-disabled condition. The
options available are All, Port Security, Storm
Control, BPDU Attack Protection, Dynamic ARP
Inspection, DHCP Snooping and L2PT Guard.
This parameter enables or disables the feature of the
error-disable recovery.
Enter the time (seconds) needed for recovering ports
from the error condition, which is caused by the module
specified; the range is from 5 to 86,400.
3.3.5 Error Disable Settings
Overview
3 System
21