9.2.5
EAP Port Config
Use the following window to implement the EAP settings on the port
specified and display its settings.
Choose Security > 802.1X > EAP Port Config to display the following
window.
You can configure the following parameters.
Parameter
From Port/ To Port
EAP Request
EAP Forward
Click Apply to check the content changed.
Figure 9-10 EAP Port Config
Choose the port you use.
This parameter enables or disables a function of EAP
requests on the port specified.
This parameter enables or disables a function of EAP
forward on the port specified. You can use it to enable
or disable the forwarding of IEEE 802.1X Protocol Data
Units (PDU).
9.2.5 EAP Port Config
Overview
9 Security
292