Mounting the DIN Rail Bracket on the Router (Vertical)
Step 2
Slide the plastic latches (4) above spring and backwards into DIN rail plate opening.
Step 3
Push each plastic latch (4) backwards and insert DIN rail clamp (2) into DIN rail plate opening. Fasten each
with screws (1) using 12 in-lbs of torque.
Step 4
Reattach the two DIN Rail clips (5) to the mounting bracket in the vertical orientation using 9 in-lbs of torque.
Mounting the DIN Rail Bracket on the Router (Vertical)
Procedure
Step 1
First, attach the DIN rail bracket to the back of the router. Refer to the following graphic for guidence.
Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide
36
Installing the Router