Table of Contents
Advertisement
Controls &
Components
Refer to the following figures and descriptions to
become familiar with the basic controls and com-
ponents of this machine. Understanding these
items and how they work will help you understand
the rest of the manual and minimize your risk of
injury when operating this machine.
B
A
E
D
Figure 1. Adjustable components.
A. Eye Shield: Protects against sparks during
operations. This shield is not a substitute for
personal protective equipment.
B. Eye Shield Lock Knob: Loosens to adjust
eye shield position and tightens to secure.
Note: The Model T32252 has an additional
lock knob on each eye shield for further
adjustment.
C. LED Worklight: Illuminates grinding area for
better visibility. Turns ON when machine is
turned ON.
D. Work Rest Lock Knob: Loosens to adjust
work rest position and tightens to secure.
E. Work Rest: Provides flat surface to rest
workpiece on during operations.
-4-
C
F
Figure 2. Electrical controls.
F.
ON/OFF Switch w/Disabling Key: Turns
motor ON when moved up; turns motor OFF
when moved down. When key is removed,
switch is disabled and machine cannot start.
G. Digital Readout: Displays spindle RPM.
H. Variable-Speed Dial: Rotates clockwise
to increase grinding speed; rotates coun-
terclockwise to decrease grinding speed.
Variable-speed dial must be turned fully
counterclockwise for motor to start.
J
Figure 3. Wheel components.
I.
Wheel Guard: Prevents accidental contact
with grinding wheel and contains particulates
and sparks produced while grinding.
J.
Grinding Wheel: Spins to grind workpiece.
To reduce your risk of
serious injury, read this
entire
using machine.
Model T32251/T32252 (Mfd. Since 08/20)
G
H
I
manual
BEFORE
Advertisement
Table of Contents
