Hitachi ZW 180-6 Operator's Manual page 117

5. Press selector knob (2) to display Rear View Camera
Monitor screen (7).
6. Press selector knob (2) to turn the rear view camera
monitor ON/OFF/AUTO.
7. When the rear view camera monitor is ON, rear view
image is continuously displayed on the basic screen.
When the rear view camera monitor is AUTO, rear view
image is displayed on the basic screen only at reverse
travel.
When the rear view camera monitor is OFF, rear view
image is not available.
IMPORTANT: In order to obtain a clear image, clean the
camera lens and the monitor display before operating
the machine. In bad weather or extreme dust, more
frequent cleaning will be required.
f
NOTE: The monitor and camera lens surface is a resin
(plastic) product. Lightly wipe the surface with a wet clean
cloth. Never use an organic solvent.
IMPORTANT:
 Never attempt to change the mounting position of
the rear view camera.
 Consult your authorized dealer if any abnormality is
found on the rear view image.
OPERATOR'S STATION
1-55
2
7
MNEC-01-006
MNEK-01-161EN
MNEK-01-162EN
MNEK-01-163EN