TORQUE
Driven Clutch Retaining Bolt:
37 ft. lbs (50 Nm)
12. Install the PVT outlet duct and align it with the inner
PVT cover. Install the push rivet and tighten the hose
clamps to specification.
NOTE
PVT Duct Clamp:
24 in-lbs (3 Nm)
13. Replace the outer PVT cover seal.
14. Reinstall outer PVT cover and secure with screws.
Torque screws to specification.
TORQUE
Outer PVT Cover Screws:
30 in. lbs (3.5 Nm)
15. Reinstall the rear cab, tail light bulbs, and fasteners.
16. Reinstall the lower left-hand frame support and
torque bolts to specification.
TORQUE
Lower Left-Hand Frame Support Bolts:
36 ft. lbs (49 Nm)
17. Install the left rear wheel and torque wheel nuts to
specification.
TORQUE
Wheel Nuts:
Steel: 45 ft. lbs (61 Nm)
Aluminum: 75 ft. lbs (102 Nm)
18. Reinstall the seat, lower the ATV, start the engine and
test the operation of the PVT system.
PVT SYSTEM
5
5.9