Baumatic BF263 Instruction Manual page 9

USING your Baumatic BF263 FRIDGE-FREEZER:
Your Fridge-Freezer's thermostat automatically regulates the
inside temperature of the compartments. By rotating the knob
from position 1 to position 5, colder temperatures can be
obtained. This is particularly important for food stored in the
freezer.
Thermostat setting :
storage of food in the freezer.
storage of food in the freezer.
food.
On setting '5', your freezer will work harder to maintain this low
temperature so after you reach this temperature, you should turn the knob to
a milder setting (depending on long or short-term storage intentions).
NOTE: The ambient temperature, temperature of freshly stored food as well as how
often the door is opened will affect the temperature of the freezer and the refrigerator.
REMINDER: Allow
and power socket are now behind the fridge and you still need to move the
unit into place, be especially careful:
distance between the back of the fridge and the wall.
You switch your Fridge-Freezer
turning the thermostat knob to position '0'.
NOTE:
When you first switch on the appliance, allow 24 hours for
it to cool down to the desired temperature. During this time, DO
NOT open the door often or place a lot of food inside the unit.
WARNING!
again after a short period, the compressor will start up again after
approximately half-an-hour. This is part of the normal operation of the
appliance.
1-2
: Use this setting for short-term
3-4
5
the unit time to settle after delivery. If your plug
If the appliance is switched off then switched back on
: Use this setting for long-term
: Use this setting to freeze fresh
Remember to leave a safe
OFF
by
8