Baumatic BF256 Instruction Manual page 9

USING your Baumatic BF256 FRIDGE-FREEZER:
MID-SETTINGS: Use these settings for long-term storage of food
in the freezer.
HIGH SETTINGS: Use these settings to freeze fresh food in your
freezer and to keep food extra cold in your refrigerator.
NOTE:
On maximum setting, your appliance will work harder to maintain
this low temperature so after you reach this temperature, you should turn
the knob to a milder setting (depending on long or short-term storage
intentions).
COMPENSATOR SWITCH – Press this switch ON should
the ambient temperature around the appliance drop
below 10 degrees Celsius.
NOTE: The ambient temperature, temperature of freshly stored
food as well as how often the door is opened will affect the
REMINDER: Allow
and power socket are now behind the fridge and you still need to move the
unit into place, be especially careful:
distance between the back of the fridge and the wall.
You switch your Fridge-Freezer
turning the thermostat knob to position '0'.
NOTE:
When you first switch on the appliance, allow 24 hours for
it to cool down to the desired temperature. During this time, DO
NOT open the door often or place a lot of food inside the unit.
WARNING!
again after a short period, the compressor will start up again after
approximately half-an-hour. This is part of the normal operation of the
appliance.
temperature of the freezer and the refrigerator.
the unit time to settle after delivery. If your plug
If the appliance is switched off then switched back on
Remember to leave a safe
OFF
by
8