Table of Contents
Advertisement
BAUMATIC MEGA 90 dishwasher user manual
CONTROL PANEL
NOTE:
YOUR DISHWASHER'S CONTROL PANEL IS ON THE TOP LIP OF THE DOOR. IF
YOUR APPLIANCE IS BEING INSTALLED UNDER A WORKTOP, YOU WILL NEED TO OPEN
THE DOOR TO SEE THE CONTROL PANEL.
Program Indicator Light: when you select washing program, the corresponding light will
1
display.
2
Program Key: Press to select washing program. Multiple presses select different programs.
See page 13 for how to program the washing cycle you want.
3
Salt and Rinse Aid Warning Light: Comes on when the softener or dispenser needs to be
refilled. Note that when you first use your dishwasher, the salt & rinse aid lights do not go
out immediately.
4
Delay start time: Displays the delay start time. Also displays the water temperature and
ERROR CODES (see p. 24).
5
Delay Key: Press to set the delay start time. Each press will set the start time for a wash
cycle by 1 hour (up to 24 hours into the future).
6
Power on Light: Comes on when Power ON/OFF Button is pressed down.
7
ON/OFF Button: Turns the power supply on and off.
NOTE: YOUR DISHWASHER CAN RUN A TEST CYCLE. THIS HAPPENS WHEN YOU PRESS EITHER THE PROGRAM KEY OR THE DELAY TIMER
KEY BEFORE PRESSING THE ON / OFF BUTTON. WHEN THIS HAPPENS, YOUR DISHWASHER WILL NOT RUN BUT WILL ENTER THIS TEST
CYCLE INSTEAD. PLEASE SEE PAGE 19 (TROUBLESHOOTING SECTION) FOR MORE INFORMATION ABOUT THIS AND HOW TO CORRECT IT.
1
ADJUSTABLE UPPER BASKET
2
SPRAY ARMS
3
LOWER BASKET
4
WATER SOFTENER
DISHWASHER FEATURES
5
MAIN FILTER
6
DETERGENT DISPENSER
7
CUP & GLASS SHELF
(ADJUSTABLE)
8
CUTLERY BASKET
4
4
9
COARSE FILTER
10
RINSE AID DISPENSER
11
DRAIN PIPE CONNECTOR
12
INLET PIPE CONNECTOR
Advertisement
Table of Contents
