Table of Contents
Advertisement
BAUMATIC MEGA 90 dishwasher user manual
j) NOW GET THE DISHWASHER LEVEL.
NOTE: YOUR
DISHWASHER MUST
BE LEVEL FOR
PROPE
R DISH RACK
OPERATION AND
WASH
PERFORMANCE.
TH
E REAR FE
ET CAN BE ADJUSTED FROM THE FRONT OF THE DISHWASHER BY TURNING THE SCREWS ON THE
LEF
T AND R
IGHT HAND SIDES OF THE CABINET. TO ADJUST THE FRONT FEET, USE A WRENCH / SPANNER AND
TURN THE FRONT
FEET UNTIL THE DISHWASHER IS LEVEL (PLEASE SEE 'REMARK B' IN THE ABOVE FIGURE).
WHEN YOU ROTATE THE ADJ
k) THE DIS
IN PLACE
.
THERE ARE TWO WAYS TO DO THIS, DEPENDING ON YOUR TYPE OF WORK
SURFACE. REMEMBER TH
FASTENINGS AT
ITS TOP ARE TO GIVE STABILITY AND WILL PREVENT IT FROM TIPPING
FORWARD:
NORMAL WORK SUR
WOODSCREWS ENSURING T
MARBLE OR GRANITE
SECURE THE TOP OF THE
BECAUSE OF THIS
, YOU WILL HAVE TO SECURE THE BRACKET TO THE SIDE PANELS OF THE
DISHWASHER CABINET
RUBBER CAP OVER TH
NOTE: DO NOT PUT ANY WEIGHT FROM THE DISHWASHER ON THESE SCREWS – ENSUR
YOUR DISHWASHER'S WEIGHT RESTS ENTIRELY ON ITS FEET.
USTER POLE CLOCKWISE, THE BACK FOOT WILL DRIVE UP THE DISHWASHER.
(P
LEASE SEE 'REMARK A' IN THE ABOVE FIGURE).
HWASHER MUST NOW BE SECURED
AT YOUR DISHWASHER'S WEIGHT MUST REST ON ITS FEET. THE
FACE
- SECURE TO THE WORK SURFACE'S UNDERSIDE BY USING TWO
HAT THE DISHWASHER CAN OPEN AND CLOSE COMFORTABLY.
WORK TOP
– FOR THESE WORKTOPS, YOU WILL NOT BE ABLE TO
DISHWASHER TO THE UNDERSIDE OF THE SPECIAL WORK SURFACE.
AND SECURE THE DISHWASHER TO THE FURNITURE HOUSING. PUT THE
E SCREW.
33
WARNING!
BE CAREFUL WHILE YOU ARE
LEVELLING YOUR DISHWASHER
IN PLACE – IT COULD TIP OVER
AND INJURE YOU!
CONSULT THE FIGURE BELO
FOR HELP!
33
W
E
Advertisement
Table of Contents
