Operation; Wall Mounting - Honeywell HFT-114B Owner's Manual

INTRODUCTION
The Super Turbo™ High Performance Fan was aerodynamically designed to give
you the versatility of changing this fan's angular direction simply by adjusting the fan
to ANY desired angular output (Fig.1). Upon using this fan, you will feel the strong
and powerful air stream that will quickly move air in order to cool an area rapidly and
efficiently.
Fig. 1

OPERATION

• Be sure the fan is in the OFF position.
• Place your fan on a dry, level surface.
• Plug the power cord into a polarized 120 volt AC wall outlet.
• To operate your Super Turbo Fan, turn the control knob to the desired fan speed:
HIGH (III), MEDIUM (II) or LOW (I) (Fig. 2).
• Adjust the fan to the desired angular air output direction.
• To start or stop the oscillation feature, press the OSCILLATE button on the base of
the fan (Fig. 3).
• To move the fan, turn the fan OFF and pick it up by the concealed handle that is
located on the outside rim of the fan (Fig. 4).
Fig. 2

WALL MOUNTING

• Locate and mark the position on the wall where the fan will be mounted
(preferably at a wall stud).
• Insert a #8 screw (bolt) into the wall stud. The screw is not included and can be
purchased at a hardware store.
• Leave approximately 3/8" of the screw (bolt) exposed.
• Line up the opening on the base of the fan with the screw (bolt) and hang the fan
on the wall.
Fig. 3 Fig. 4