Troubleshooting - AEG DVD 4517 Operation Manual

Table of Contents

Advertisement

Available languages

Available languages

Troubleshooting

Troubleshooting
Before sending the machine to the Customer Services, use the following table to check whether you can rectify
the fault yourself.
WARNING:
Before troubleshooting, switch the player off and remove the mains plug. Wait until the player and accessories
have cooled down. Never use a defective player.
Fault
The power supply
light does not light
No image displayed
on screen
No response when
pressing button
No sound
The remote control
does not work
Titles are played in
wrong order
DVD cannot be
played
66
05-DVD 4517 AEG - GB 66
Possible cause
No power supply
no power supply/ mains switch
switched off
Video cable not correctly
connected
no DVD/CD inserted
DVD/CD not compatible
DVD/CD incorrectly placed in
CD/DVD-tray
CD/DVD is dirty
CD/DVD is damaged
Incorrect settings
The child protection system is
activated
Power supply problem or
static charging of appliance
Audio cable not connected
Amplifi er switched off
Incorrect settings
wrong direction
too far away
Batteries empty
Playlist is used
DVD has not been fi nalized
Solution
Put the mains plug in correctly, if necessary, check the
socket is working with another appliance.
Switch the player on by the mains switch (Fig. 1/1).
Check the correct fi t of the Video cable ➯ Page 48,
„Connecting the Video cable". Make sure that the jacks
are tightly in the sockets.
Insert a CD/DVD.
Use only compatible media (see ➯ Page 40, „Technical
data").
Turn the CD/DVD around.
Clean the CD/DVD around ➯ Page 50, „Handling
CD/DVD".
Use a different CD/DVD.
Check the settings of your DVD-Player.
Deactivate the child protection ➯ Page 61, „Child
protection".
Switch off the main switch and pull out the mains plug.
Insert the mains plug into the socket and switch the
player on again.
Video plug for transmission of the Video signal, you
must use and Audio cable in addition to the Video
cable ➯ Page 49, „Connecting the Audio cable".
If you use an amplifi er for Audio output: check whether
the amplifi er is switched on.
Check the settings of your DVD-Player.
The remote control is not pointed towards the DVD-
Player.
Make sure that the remote control is not further than
7 m away from the player.
Replace the batteries in the remote control ➯ Page 47,
„Remote control battery installation".
Delete the playlist ➯ Page 56, „Deleting a Playlist".
Use a fi nalized DVD.
19.01.2006, 10:54:01 Uhr

Advertisement

Chapters

Table of Contents
loading

Table of Contents