NEC Aspila Topaz Programming Manual page 264

Program 30: DSS/DLS Console
30-02: DSS Console Extension Assignment
Description
Use Program 30-02 : DSS Console Extension Assignment to identify which extensions have DSS Consoles
assigned.
• You can have up to 9 different DSS Consoles. A single extension can have up to 9 64-Button DSS Consoles (9 is
the maximum allowed per system).
• Each extension in the system can have one 24-Button DLS Console (72 maximum). An extension can have a 24-
Button DLS Console in addition to 64-Button DSS Consoles.
When programming, each extension/DSS Console combination is called a Console Number.
There are 9 Console Numbers (1-9). You assign Console Numbers to extensions. When entering data, you normally
make the assignment for Console Number 1 first.
Input Data
DSS Console Number
1-9
Conditions
None
Feature Cross Reference
Direct Station Selection (DSS) Console
Telephone Programming Instructions
To enter data for Program 30-02(DSS Console Extension Assignment):
1. Enter the programming mode.
2. Enter 30 02
30-02-01 DSS1
Ext.Number
3. Enter the number of the item you want to program.
30-02-xx DSSx
xxxxx
4. Select the DSS Console number to be programmed by pressing the FLASH or the VOLUME▲ or VOLUME▼
keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you've exited that series's programming section.
Programming Manual
The Extension Number for Key Telephone connected
with the DSS Console
Max. 4 digits
256
IN
SA
SB
Related
Default
Program
No setting