Bosch Pack201HS Instruction Manual page 105

Pack201 | Maintenance | Section 6
6.4 Maintenance
DANGER
Whenever maintaining this
equipment, always lockout the
main power source with the
disconnect lever on the wrapper
per OSHA Standard 1910.147.
This precaution must be taken to
avoid the possibility of a serious
shock hazard, or an accidental
cycling of the wrapper which could
cause a very serious injury. It is
recommended the air supply also
be disconnected before starting.
To prevent malfunctions and damage to the
wrapper, check the equipment for correct
reassembly and for tools, supplies etc. left
lying in or on the machine.
6.4.1 Daily Maintenance Checklist
Daily Maintenance Checks
Assembly
Former/Folding Box
Discharge Belt
6.4.2 Weekly Maintenance Checklist
General
Assembly
Film splicer
Reject systems
Product flow
Safety Components
Assembly
E-Stop switches
Interlock Switches and Safety
Devices
Machine Guard
Warning labels
© Bosch Packaging Technology, Inc.
All rights reserved 2012
Cleaning Procedure
Check bearing operation.
Check belt tension. Adjust if necessary.
Maintenance Check
Inspect for proper operation
Check for proper setup and operation
Ensure proper flow through the machine. Record all settings
and adjustments.
Maintenance Check
Inspect for proper operation
Inspect for proper operation
Inspect for proper installation and function.
Inspect and replace if missing or damaged
EN | 8