Table of Contents
Advertisement
CONFIGURATION TOOL
Item
COM
COM Setup
Baud rate
Parity
Data bit
Stop bit
Current status
Parameter
Color
Setup
14
Figure 4-3 upgrade Interface
You can refer to the following sheet for detailed information.
Brightness
Contrast
Note
Select the corresponding COM number.
Default value is 9600 (Read-only)
None
Default value is 8 (Read-only).
Default value is 1 (Read-only).
Display the corresponding COM status.
Set the brightness value to adjust the video bright and
dark level. The value ranges from 0 to 100.
•
It includes two options: Enable/disable. You can
check the box to enable the contrast function.
•
After you enabled this function, you can set
different value to control the contrast. The value
ranges from 0 to 100.
Advertisement
Table of Contents
