Network Bandwidth - Sony Vision Exchange PEQ-C100 System Integration & Services Manual

v=0
s=Vision Exchange Streaming Output
i=Vision Exchange Streaming Output
o=- 0 0 IN IP4
c=IN IP4 XXX.XXX.XXX.XXX
m=video 5004 RTP/AVP 105
a=rtpmap:105 H264/90000
m=audio 5006 RTP/AVP 98
a=rtpmap:98 mpeg4-generic/48000/2
a=fmtp:98
mode=AAC-hbr;profile-level-id=1;object=2;streamType=5;sizelength=13;in
dexlength=3;indexdeltalength=3;config=1190
a=ptime:20
Notes
Enter the IP address of the Wowza Streaming Engine in XXX.XXX.XXX.XXX.

The 5004 in "m=video 5004 RTP/AVP 105" is the port number of the video set on the main

unit.
The 5006 in "m=audio 5006 RTP/AVP 98" is the port number of the audio set on the main

unit.

Network bandwidth

The video quality and throughput used for the video conferencing function is set on the
[Setting] screen > [Streaming Output] page of the main unit.
For details about operation, refer to the Help Guide.
The configurable frame rates and throughput are given below.
Allow a margin of between 10% to 30% when calculating the network bandwidth as these
values are empirical values only.
The actual throughput will vary depending on the subject.
Video
Image Display resolution
quality
High
Same as main
Middle display on
transmitting device
Low
XXX.XXX.XXX.XXX
Frame rate (max.)
30 fps
10 fps
1 fps
Throughput (max.)
(when playing video)
6 Mbps
4 Mbps
1 Mbps
33