Log In; Configure The Appliance - Cisco Stealthwatch Hardware Deployment And Configuration Manual

Secondary SMC
9.
(if used)
Your system might not have all the appliances shown here.

1. Log In

Use the following instructions to configure each appliance using the Appliance Setup
Tool.
1.
In the address field of your browser, type
the appliance.
Primary SMC:
l
Up:
Confirm each appliance is Up before you start configuring the next
l
appliance in your cluster.
Order:
Make sure you
l
communicate correctly.
2.
Enter the following credentials to log in:
User Name:
l
Password:
l

2. Configure the Appliance

When you log in to the appliance for the first time, the Appliance Setup Tool guides you
through each configuration step.
1. Change Default Password:
Next
Click to scroll to each user.
© 2021 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
Configure the primary SMC first.
configure your appliances in order
admin
lan411cope
Enter new passwords for admin, root, and sysadmin.
Appendix C. Configuring Your Appliances
as Up before you start the Flow Sensor
configuration.
Make sure the primary SMC is shown as
Up before you start the secondary SMC
configuration.
The secondary SMC selects itself as
Central Manager. Configure Failover
after all appliances are configured.
https://
followed by the IP address of
so they
- 86 -